Outrageous Water Bills? Check This Bathroom Fixture Now

Posted on: 2 July 2019


If you've noticed a substantial increase in your water bills over the past few months, your toilet could be to blame for your rising utility costs. Toilets that run, leak, or flush by themselves can waste water over time. If you don't take care of the problem now, you could face other troubles in the future. Read below to learn how you can detect a leak in your toilet.

Check the Tank's Water Line

One of the places leaks occur the most in toilets is the tank. Tanks typically contain one floater and one flapper. If the floater or flapper goes bad, it can allow water to seep out of your tank throughout the day. Unless you pay close attention to the water level inside the tank, you might not even know that it has a bad floater or leaking flapper.

You can see if the floater is bad by monitoring the water line inside the tank. If the water inside your tank falls below the water line, check the floater to see if it raises and lowers properly during and after flushes. If the floater doesn't lift after you flush the toilet, try adjusting the fill valve. The fill valve should release enough water into the tank to trigger the floater to raise.

You can check the flapper during your inspection. The flapper should sit completely over the hole at the bottom of the tank. If the flapper doesn't cover the opening, water can leak out of the tank. The flapper may also be damaged or warped from long-time use. If the flapper looks out of place or broken, go ahead and replace it. If none of the small fixes above work, hire a residential plumber.

Get the Professional Fixes You Need Today

Some toilet leaks can occur in places homeowners can access easily, including the water lines in your bathroom. Water lines can break and release small amounts of water over time. If the water lines in your bathroom don't require repairs, a plumber can check the waste pipe in your bathroom.

The waste pipe can clog up with solid waste that prevents it from emptying properly. Your toilet may not flush or fill up properly because of this. A plumber can access and empty the waste pipe. If the pipe doesn't fit properly or looks cracked, a plumber may offer to replace it. A broken waste pipe can cause problems with your bathroom ventilation system as well as the sewer line sitting below your house. A contractor can let you know if you need to do anything else to your bathroom plumbing during the visit.

Don't wait until your utility bills become unmanageable to repair your toilet. Contact a plumber who offers residential plumbing services today to receive the services you need.